Command Manual – ACLH3C S7500E Series Ethernet Switches Chapter 1 ACL Configuration Commands1-3Table 1-1 Description on the fields of the display acl resource commandField DescriptionInterface Interface indicated by its type and numberTypeResource type:z ACL indicates ACL rule resources,z Meter indicates traffic policing resources,z Counter indicates traffic statistics resources,z IFP indicates the count of resources in the inbound direction,z EFP indicates the count of resources in the outbound directionz VFP indicates the count of resources that are before Layer 2forwarding and applied in QinQ.Total Total number of ACLs supportedReserved Number of reserved ACLsConfigured Number of configured ACLsRemaining Number of remaining ACLs1.1.2 display time-rangeSyntaxdisplay time-range { time-name | all }ViewAny viewParameterstime-name: Time range name comprising 1 to 32 characters. It is case insensitive andmust start with an English letter. To avoid confusion, this name cannot be all.all: All existing time ranges.DescriptionUse the display time-range command to display the configuration and state of aspecified or all time ranges.A time range is active if the system time falls into its range, and if otherwise, inactive.Examples# Display the configuration and state of time range trname. display time-range trnameCurrent time is 22:20:18 1/5/2006 Thursday
