4200-A2-GB20-00 August 2002 6-16Cross Connect CommandsOverviewThis chapter contains the following CrossConnect commands: DLT-CRS-VC on page 6-2 ED-CRS-VC on page 6-4 ENT-CRS-VC on page 6-7 RTRV-CRS-VC on page 6-10Cross-Connection DefaultsThe default uplink cross connections start with VPI = 2, VCI = 32 for Port 1 andincrements one VCI for each subsequent port. For example, Port 2 crossconnection is VPI = 2, VCI = 33, and Port 3 cross connection is VPI = 2, VCI = 34,and so on. The default uplink for inband management for the ATM-1 interface isVPI = 0, VCI = 33, and for the ATM-2 interface is VPI = 0, VCI = 33.