3. ADSL Facility Commands3-40 August 2002 4200-A2-GB20-00RTRV-PROFILE-ADSLThe RTRV-PROFILE-ADSL command retrieves information about ADSL lineconfiguration profiles.Response FormatIf, in less than 2 seconds, a normal or error response cannot be sent, the followingacknowledgment response is sent:IP cAfter the above response, a new command input may be generated.Normal Response:sid yy-mm-dd hh:mm:ssM c COMPLD/* RTRV-PROFILE-ADSL:[tid]:adsl_profile_id:[ctag][::,profile_scope] */adsl_profile_id:profile_name,profile_scope,latency,profile_state;Error Response:sid yy-mm-dd hh:mm:ssM c DENY/* RTRV-PROFILE-ADSL:[tid]:adsl_profile_id:[ctag][::,profile_scope] */aid:ERRCDE=errcde/* error description */;Table 3-31. RTRV-PROFILE-ADSL Command ParametersRTRV-PROFILE-ADSL:[tid]:adsl_profile_id:[ctag][::,profile_scope];RESTRICTIONS: All parameters in this command are position-defined.[tid] Identification of the target NE.The default value is null. The NE SIDcode is the only other valid value.adsl_profile_id ADSL profile index (1−30). Grouping and ranging are allowed. ALL maybe used.[ctag] Correlation tag (6 characters maximum) that links an input commandwith associated output responses. The default is 0.[profile_scope] Scope of the profile. The valid value is LOCAL (local to this stack only).If no value is specified, this parameter is ignored (all values arereported).