Paradyne GranDSLAM 4200 User Manual

Also see for GranDSLAM 4200: Installation guide

Contents

10. Fault Commands4200-A2-GB20-00 August 2002 10-13Response FormatIf, in less than 2 seconds, a normal or error response cannot be sent, the followingacknowledgment response will be sent:IP cAfter the above response, a new command input may be generated.Normal Response:sid yy-mm-dd hh:mm:ssM c COMPLD/* RTRV-ALM-T1:[tid]:aid_ds1:[ctag]::[ntfncde],,[srveff],[locn],[dirn] */"aid_ds1,[aid_type]:ntfncde,cond_ds1,serveff,,,locn,dirn:cond_descr";Error Response:sid yy-mm-dd hh:mm:ssM c DENY/* RTRV-ALM-T1:[tid]:aid_ds1:[ctag]::[ntfncde],,[srveff],[locn],[dirn] */errcde/* error description */;Table 10-8. RTRV-ALM-T1 Response Parameters (1 of 2)Parameter Explanationtid Target NE identificationyy-mm-dd Year, month, and dayhh:mm:ss Hour, minute, and secondM Message generated in response to an input commandc If provided, ctag; otherwise 0COMPLD CompletedDENY Input command is denied/* */ Enclosed are human readable comments – unspecified formaterrcde Error code (see Appendix A,Error Codes)aid_ds1 As described for command parameters (see Table 10-7, RTRV-ALM-T1Command Parameters), except that ALL is not used.aid_type The type of Access Identifier. The value is T1.ntfncde As described for command parameters, except that ALL is not used.