10. Fault Commands10-4 August 2002 4200-A2-GB20-00ExampleRetrieve all major service-affecting ADSL alarms for rack 1, shelf 1, slot 1, circuit 4.RTRV-ALM-ADSL:TAMPA:ADSL-1-1-1-4:42::MJ,,SA;TAMPA 02-06-27 03:38:43M 42 COMPLD/* RTRV-ALM-ADSL:TAMPA:ADSL-1-1-1-4:42:::: */"ADSL-1-1-1-4,ADSL:MJ,LPR,SA,,,NEND,RCV,:Loss of Power";Related CommandsNonecond ADSL Condition. Valid values are:FACTERM: Modem could not initialize (near-end only)LCD-F: Loss of Cell Delineation (fast) (near-end only)LOF: Loss of FrameLOL: Loss of Link (near-end only)LOS: Loss of Signal (near-end only)LPR: Loss of Power (far-end only)LORATE: Line rate is below planned rate (Loss of Signal Quality)serveff As described for command parameters (see Table 10-1,RTRV-ALM-ADSL Command Parameters), except that ALL is not used.locn As described for command parameters (see Table 10-1,RTRV-ALM-ADSL Command Parameters).dirn As described for command parameters (see Table 10-1,RTRV-ALM-ADSL Command Parameters).cond_descr Description of alarm conditionTable 10-2. RTRV-ALM-ADSL Response Parameters (2 of 2)Parameter Explanation