3. ADSL Facility Commands4200-A2-GB20-00 August 2002 3-43ExampleRetrieve alarm profile 5.RTRV-PROFILE-ADSLALM:TAMPA:5:42;TAMPA 02-07-24 12:30:43M 42 COMPLD/* RTRV-PROFILE-ADSLALM:TAMPA:5:42 */5:LOCAL:TAMPA101:CONFIG;Related CommandsACT-PROFILE-ADSLALM on page 3-4DLT-PROFILE-ADSLALM on page 3-8ED-PROFILE-ADSLDNALM on page 3-16ED-PROFILE-ADSLUPALM on page 3-21ENT-PROFILE-ADSLALM on page 3-26RTRV-PROFILE-ADSLALM on page 3-42Table 3-34. RTRV-PROFILE-ADSLALM Response ParametersParameter Explanationtid Target NE identificationyy-mm-dd Year, month, and dayhh:mm:ss Hour, minute, and secondM Message generated in response to an input commandc If provided, ctag; otherwise 0COMPLD CompletedDENY Input command is denied/* */ Enclosed are human readable comments – unspecified formatadsl_profile_id As described for command parameters, except that ALL is not usedprofile_name Name (32 characters maximum) that uniquely identifies the profilewithin its scopeprofile_scope As described for command parametersprofile_state State of the profile (ADSL alarm profiles only). Values are:CONFIG: Profile is currently being created. It can be configured, but notused.ACTIVE: Profile has been activated and is ready for use and isconfigured.errcde Error code (see Appendix A,Error Codes)