12. Security Commands12-14 August 2002 4200-A2-GB20-00RTRV-USER-SECUThe RTRV-USER-SECU command retrieves the security levels for a specifieduser. The user’s password cannot be retrieved.Response FormatIf, in less than 2 seconds, a normal or error response cannot be sent, the followingacknowledgment response is sent:IP cAfter the above response, a new command input may be generated.Normal Response:sid yy-mm-dd hh:mm:ssM c COMPLD/* RTRV-USER-SECU:[tid]:uid:[ctag][:] */"uid:uap:uid_nblk";Error Response:sid yy-mm-dd hh:mm:ssM c DENY/* RTRV-USER-SECU:[tid]:uid:[ctag][:] */aid:ERRCDE=errcde/* error description */;Table 12-13. RTRV-USER-SECU Command ParametersRTRV-USER-SECU:[tid]:uid:[ctag][:];RESTRICTIONS: All parameters in this command are position-defined.[tid] Identification of the target NE. The default value is null. The NE SIDcode is the only other valid value.uid User Identification name (10 characters maximum). Input iscase-sensitive. ALL is supported.[ctag] Correlation tag (6 characters) maximum that links an input commandwith associated output responses. The default is 0.
