Paradyne GranDSLAM 4200 User Manual
Also see for GranDSLAM 4200: Installation guide
                                                                                                                                                                                                                                                                                                                                                                                              | |
Contents
|
3. ADSL Facility Commands4200-A2-GB20-00 August 2002 3-41ExampleRetrieve profile 5.RTRV-PROFILE-ADSL:TAMPA:5:42;TAMPA 02-07-24 12:30:43M 42 COMPLD/* RTRV-PROFILE-ADSL:TAMPA:5:42 */5:LOCAL:TAMPA101:CONFIG;Related CommandsACT-PROFILE-ADSL on page 3-2DLT-PROFILE-ADSL on page 3-6ENT-PROFILE-ADSL on page 3-24Table 3-32. RTRV-PROFILE-ADSL Response ParametersParameter Explanationtid Target NE identificationyy-mm-dd Year, month, and dayhh:mm:ss Hour, minute, and secondM Message generated in response to an input commandc If provided, ctag; otherwise 0COMPLD CompletedDENY Input command is denied/* */ Enclosed are human readable comments – unspecified formatadsl_profile_id As described for command parameters, except that ALL is not usedprofile_name Name (32 characters maximum) that uniquely identifies the profilewithin its scopeprofile_scope As described for command parameterslatency Latency of the ADSL line. Only single latency is supported upstreamand downstream. The valid value is FAST (only ADSL FAST supported).profile_state State of the profile (ADSL profiles only). Values are:CONFIG: Profile is currently being created. It can be configured, but notused.ACTIVE: Profile has been activated and is ready for use and isconfigured.errcde Error code (see Appendix A,Error Codes) |
Related manuals for Paradyne GranDSLAM 4200
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine