Paradyne GranDSLAM 4200 User Manual

Also see for GranDSLAM 4200: Installation guide

Contents

14. System Commands14-8 August 2002 4200-A2-GB20-00CPY-FILEThe CPY-FILE command copies the contents of a configuration or software file ona selected equipment module to or from an external file server.Table 14-7. CPY-FILE Command ParametersCPY-FILE:[tid]:aid_eqpt:[ctag]::svripaddr[,srcfile][,destfile],ftype,,,,,[svruid][,svrpid];RESTRICTIONS: All parameters in this command are position-defined.[tid] The identification of the target NE. TID is optional and has a defaultvalue of null. The NE's SID code is the only other valid value.aid_eqpt Equipment unit access identifier. The access identifier of a unit ofequipment with downloadable software or configuration files. Enteraid_equip in the format COM (common equipment system identifier).[ctag] The correlation tag that correlates an input command with its associatedoutput response(s). It is assigned by the originator of the command. Thevalue is limited to six characters, which may be an identifier or a decimalnumeral. It is optional with a default of 0.svripaddr File Server IP Address. Valid values are:– ddd.ddd.ddd.ddd: IP address (ddd= 0−255)– NONE: No FTP server (default)srcfile Source file name (file name and location of the external file server).Name of the source file to be transferred during the software download.This field can include a full path name in addition to the name of the fileto be transferred. This field is null (not used) for upload operations.destfile Destination file name (file name and location of the external file server)and location for the file to be transferred during the software upload.This field can include a full path name in addition to the name of the fileto be transferred. This field is null (not used) for download operations.ftype File type. Type of file to be transferred. Valid types are:– SW: Software image. Software images downloaded into the NEwill overwrite the one not currently in use.– CNFG: Configuration image. Configuration files downloaded intothe NE are applied directly to the active configuration.[svid] User name (if needed) to log in to the server. If no value is specified, nullis assumed.svrpid Password (if needed) to log in to the server. If no value is specified, nullis assumed.