C. Traps and MIBsC-36 August 2002 4200-A2-GB20-00Paradyne Enterprise MIBsThe following Paradyne Enterprise MIB Objects are supported: Paradyne DSLAM System MIB (pdn_dslam.mib) Paradyne Security MIB (pdn_Security.mib) Paradyne Syslog MIB (pdn_syslog.mib) Paradyne Health and Status MIB (mpe_HealthAndStatus.mib) Paradyne Control MIB (mpe_Control.mib) andParadyne Control MIB (pdn_Control.mib) Paradyne Configuration MIB (mpe_Config.mib) andParadyne Configuration MIB (pdn_Config.mib) Paradyne Time MIB (pdn_Time.mib) Paradyne mpe_ATMConf.mib Paradyne ReachDSL MIB (pdn_reachDSL.mib) Paradyne DS1 Config MIB (RFC 2495) andParadyne DS1 Extension MIBParadyne DSLAM System MIB (pdn_dslam.mib)Support for the pdn_dslam.mib is provided to enable an NMS to access certainobjects specific to a DSLAM. The objects listed in Table C-15, Paradyne DSLAMSystem MIB Objects, are supported.Table C-15. Paradyne DSLAM System MIB Objects (1 of 3)Object Description Setting/ContentsloginUserId Shows the 10 most recent logins andall active users currently accessing thedevice. It also keeps a record of theaccess application, user privileges, andlog-in status.Read only.loginTime Describes the access application usedby the end user to access the device.Read only. Valid values are: console(1) telnet(2) ftp(3) web(4) modem(5)loginAccessHost Contains the IP address of the NMSstation when the access application isTelnet or FTP.Read only.