6. Cross Connect Commands4200-A2-GB20-00 August 2002 6-11Response FormatIf, in less than 2 seconds, a normal or error response cannot be sent, the followingacknowledgment response is sent:IP cAfter the above response, a new command input may be generated.Normal Response:sid yy-mm-dd hh:mm:ssM c COMPLD/* RTRV-CRS-VC:[tid]:aid_vcl:[ctag]::::[pstf] */nt_vci,lt_vci:::state;Error Response:sid yy-mm-dd hh:mm:ssM c DENY/* RTRV-CRS-VC:[tid]:aid_vci:[ctag]::::[pstf] */errcde;Table 6-8. RTRV-CRS-VC Response Parameters (1 of 2)Parameter Explanationtid Target NE identificationyy-mm-dd Year, month, and dayhh:mm:ss Hour, minute, and secondM Message generated in response to an input commandc If provided, ctag; otherwise 0COMPLD CompletedDENY Input command is denied/* */ Enclosed are human readable comments – unspecified formaterrcde Error code (see Appendix A,Error Codes)nt_vci Virtual Channel Identifier for the Virtual Channel Link on the NT(network) side. Values are:NTVCL-vpi-vci– vpi: Virtual Path Identifier– vci: Virtual Channel Identifier for the Virtual Channel Link
