Paradyne GranDSLAM 4200 User Manual

Also see for GranDSLAM 4200: Installation guide

Contents

3. ADSL Facility Commands3-44 August 2002 4200-A2-GB20-00RTRV-PROFILE-ADSLDNThe RTRV-PROFILE-ADSLDN command enables you to retrieve ADSL lineconfiguration parameters associated with the downstream direction (from ATU-Cto ATU-R) in an ADSL Profile. See ED-PROFILE-ADSLDN on page 3-14 forinformation on how to create a new ADSL profile.Response FormatIf, in less than 2 seconds, a normal or error response cannot be sent, the followingacknowledgment response is sent:IP cAfter the above response, a new command input may be generated.Normal Response:sid yy-mm-dd hh:mm:ssM c COMPLD/*RTRV-PROFILE-ADSLDN:[tid]:adsl_profile_id:[ctag]:[::,profile_scope] */adsl_profile_id:profile_scope:profile_name:adslprof_nblk;Error Response:sid yy-mm-dd hh:mm:ssM c DENY/*RTRV-PROFILE-ADSLDN:[tid]:adsl_profile_id:[ctag][::profile_scope] */errcde;Table 3-35. RTRV-PROFILE-ADSLDN Command ParametersRTRV-PROFILE-ADSLDN:[tid]:adsl_profile_id:[ctag][::,profile_scope];RESTRICTIONS: All parameters in this command are position-defined.[tid] Identification of the target NE. TID is optional and has a default value ofnull. The NE's SID code is the only other valid value.adsl_profile_id Numeric identifier of a profile (1−30).[ctag] Correlation tag (6 characters maximum) that links an input commandwith associated output responses. The default is 0.profile_scope The scope of a profile. The valid value is LOCAL (local to this stackonly). If no parameter is specified, this value is ignored (all values arereported).