Paradyne GranDSLAM 4200 User Manual

Also see for GranDSLAM 4200: Installation guide

Contents

10. Fault Commands10-6 August 2002 4200-A2-GB20-00Response FormatIf, in less than 2 seconds, a normal or error response cannot be sent, the followingacknowledgment response will be sent:IP cAfter the above response, a new command input may be generated.Normal Response:sid yy-mm-dd hh:mm:ssM c COMPLD/* RTRV-ALM-ALL:[tid]:aid_all:[ctag]::[ntfncde],,[srveff] */"aid_adsl,[aid_type]:ntfncde,cond_adsl,serveff,,,[locn],[dirn],:[cond_descr]";Error Response:sid yy-mm-dd hh:mm:ssM c DENY/* RTRV-ALM-ALL:[tid]:aid_all:[ctag]::[ntfncde],,[srveff] */errcde;Table 10-4. RTRV-ALM-ALL Response Parameters (1 of 2)Parameter Explanationtid Target NE identificationyy-mm-dd Year, month, and dayhh:mm:ss Hour, minute, and secondM Message generated in response to an input commandc If provided, ctag; otherwise 0COMPLD CompletedDENY Input command is denied/* */ Enclosed are human readable comments – unspecified formaterrcde Error code (see Appendix A,Error Codes)aid Access identifier associated with the alarm. Valid values are:SHELF-rack-shelfLTA-rack-shelf-slotADSL-rack-shelf-slot-circuitNTT1-circuit[aid_type] The type of Access Identifier.