Paradyne GranDSLAM 4200 User Manual

Also see for GranDSLAM 4200: Installation guide

Contents

9. Performance Commands9-6 August 2002 4200-A2-GB20-00ExampleReport downstream operations parameters for ADSL-1-1-1-3.REPT-OPSTAT-ADSLDN:TAMPA:ADSL-1-1-1-3:42;TAMPA 01-10-24 12:30:43M 42 COMPLD/* REPT-OPSTAT-ADSLDN:TAMPA:ADSL-1-1-1-3:42 */"ADSL-1-1-1-3:RELCAP,70""ADSL-1-1-1-3:NMR,3""ADSL-1-1-1-3:PWR,8""ADSL-1-1-1-3:ATEN,4""ADSL-1-1-1-3:CELLSF,1000";Related CommandsREPT-OPSTAT-ADSLUP on page 9-7Table 9-4. REPT-OPSTAT-ADSLDN Response ParametersParameter Explanationtid Target NE identificationyy-mm-dd Year, month, and dayhh:mm:ss Hour, minute, and secondM Message generated in response to an input commandc If provided, ctag; otherwise 0COMPLD CompletedDENY Input command is denied/* */ Enclosed are human readable comments – unspecified formaterrcde Error code (see Appendix A,Error Codes)aid_adsl As described for command parameters (see Table 9-3,REPT-OPSTAT-ADSLDN Command Parameters).op_adsl ADSL operational parameter. Values are:ATEN: Signal attenuation (0 − 60 dB)CELLSF: Rolling count of cells transmitted downstream on Fast channelCURFBR: Current Fast channel bit rate (32 − 2176 QOSCLASSF:Quality of Service for the ADSL Fast channel. The supported option isUBR (Unspecified bit rate). UBR is the default.NMR: Noise margin (0 − 31 dB)PWR: Transmitted signal power n (0−20 dB)RELCAP: Relative capacity operation. Configured bit rate as apercentage of the current bit rate (0 − 100)value Value of parameter specified by op_adsl