Paradyne GranDSLAM 4200 User Manual

Also see for GranDSLAM 4200: Installation guide

Contents

3. ADSL Facility Commands4200-A2-GB20-00 August 2002 3-51Table 3-40. RTRV-PROFILE-ADSLUP Response ParametersParameter Explanationtid Target NE identificationyy-mm-dd Year, month, and dayhh:mm:ss Hour, minute, and secondM Message generated in response to an input commandc If provided, ctag; otherwise 0COMPLD CompletedDENY Input command is denied/* */ Enclosed are human readable comments – unspecified formatadsl_profile_id As described for command parameters (see Table 3-39,RTRV-PROFILE-ADSLUP Command Parameters), except that ALL isnot used.profile_scope As described for command parameters (see Table 3-39,RTRV-PROFILE-ADSLUP Command Parameters).profile_name A string of up to 32 characters that uniquely identifies the profile withinits scope.[adslprof_nblk] ADSL parameter block containing one or more of the following namedparameters (separated by commas):MAXFBR: Maximum fast-channel bit rate in kilobits per second(32−2176).MINFBR: Minimum fast-channel bit rate in kilobits per second (32).MAXNMR: Maximum additional noise margin (16 dB).MINNMR: Minimum additional noise margin (0 dB).RAMODE: Rate adaptive mode. Valid values are:– AT_RUN: Automatically selected at run time (default).– PFBR: Planned fast channel bit rate in kilobits per second(32−2176).TNMR: Target noise margin (3−14 dB).If not specified, the values of these parameters remain unchanged.errcde Error code (see Appendix A,Error Codes)