Paradyne GranDSLAM 4200 User Manual

Also see for GranDSLAM 4200: Installation guide

Contents

11. Log Commands11-2 August 2002 4200-A2-GB20-00INIT-LOGThe INIT-LOG command initializes selected logs.Response FormatIf, in less than 2 seconds, a normal or error response cannot be sent, the followingacknowledgment response will be sent:IP cAfter the above response, a new command input may be generated.Normal Response:sid yy-mm-dd hh:mm:ssM c COMPLD/* INIT-LOG:[tid]:[logid]:[ctag]::lognm */;Error Response:sid yy-mm-dd hh:mm:ssM c DENY/* INIT-LOG:[tid]:[logid]:[ctag]::lognm */errcde;Table 11-1. INIT-LOG Command ParametersINIT-LOG:[tid]:[logid]:[ctag]::lognm;RESTRICTIONS: All parameters in this command are position-defined.[tid] The identification of the target NE. TID is optional and has a defaultvalue of null. The NE's SID code is the only other valid value.logid COM is the only allowed value other than NULL for the AID field.[ctag] The correlation tag that correlates an input command with its associatedoutput response(s). It is assigned by the originator of the command. Thevalue is limited to six characters, which may be an identifier or a decimalnumeral. It is optional with a default of 0.lognm Names of logs to be initialized. Valid values are:UNKCELL−[aid_atmport]: Unknown cell log for the ATM interface (seeED-ATMPORT).SYSTEM: System log containing records of all significant system events(alarms, events, database chages, ftp file transfer status, and securitymessages).ALL: All logs.