Paradyne GranDSLAM 4200 User Manual

Also see for GranDSLAM 4200: Installation guide

Contents

9. Performance Commands4200-A2-GB20-00 August 2002 9-3Table 9-2. REPT-OPSTAT-ADSLCOM Response ParametersParameter Explanationtid Target NE identificationyy-mm-dd Year, month, and dayhh:mm:ss Hour, minute, and secondM Message generated in response to an input commandc If provided, ctag; otherwise 0COMPLD CompletedDENY Input command is denied/* */ Enclosed are human readable comments – unspecified formaterrcde Error code (see Appendix A,Error Codes)aid_adsl As described for command parameters (see Table 9-1,REPT-OPSTAT-ADSLCOM Command Parameters).op_adsl ADSL operational parameter. Parameters are:STATUSNE: Current status of near-end modem (ATU-C). Values are:– NORMAL: no failure condition– LOF: Loss Of Framing– LOS: Loss Of Signal– LORATE: Line rate is below planned rate (Loss of Signal Quality)– LOL: Loss Of Link– LOCD: Loss Of Cell Delineation– INITF: modem initialization failure– NOPEER: No peer ATU presentSTATUSFE: Current status of far-end modem (ATU-R). Values are:– NORMAL (no failure condition)– LOF (loss of framing) LOS (loss of signal)– LORATE: Line rate is below planned rate (Loss of Signal Quality)– LPR (loss of power to modem)LASTCHNGDATE: Date of last change in the operational state of themodem. Values are mm-dd (month and day), where mm= 00 − 12 anddd = 00 − 31.LASTCHNGTIME: Time of last change in the operational state of themodem. Values are hh-mm (hour and minute), where hh = 00 − 23 andmm = 00 − 59.value Value of parameter specified by op_adsl