10. Fault Commands4200-A2-GB20-00 August 2002 10-39Response FormatIf, in less than 2 seconds, a normal or error response cannot be sent, the followingacknowledgment response will be sent:IP cAfter the above response, a new command input may be generated.Normal Response:sid yy-mm-dd hh:mm:ssM c COMPLD/* RTRV-COND-T1:[tid]:aid_ds1:[ctag]::[cond_dsl1],[locn],[dirn] */"aid_ds1,[aid_type]:ntfncde,cond_ds1,serveff,,,[locn],[dirn],,[cond_descr]";Error Response:sid yy-mm-dd hh:mm:ssM c DENY/* RTRV-COND-T1:[tid]:aid_ds1:[ctag]::[cond_ds1], [locn],*/errcde/* error description */;Table 10-24. RTRV-COND-T1 Response Parameters (1 of 2)Parameter Explanationtid Target NE identificationyy-mm-dd Year, month, and dayhh:mm:ss Hour, minute, and secondM Message generated in response to an input commandc If provided, ctag; otherwise 0COMPLD CompletedDENY Input command is denied/* */ Enclosed are human readable comments – unspecified formaterrcde Error code (see Appendix A,Error Codes)aid_ds1 As described for command parameters (see Table 10-23,RTRV-COND-T1 Command Parameters).aid_type The type of Access Identifier. The value is T1.