System Settings115Mailbox Receive Display Priority 1 to 3Specifies the display priority to the fax documents in mailboxes. Select from [F Code],[Remote Terminal ID], and [Remote Terminal Name].Direct FaxSpecifies whether to enable or disable the Direct Fax feature.Line 1 - Line SelectionSpecifies whether to use Line 1 for both fax transmission and fax reception, or for faxreception only.Fax Received OptionsThis feature allows you to sort received documents by incoming line to specifiedmailboxes or to the output trays.1. Select [Fax Received Options]in the [Features] menu.2. Change the required settings.3. Select [Close].Mailbox Selector SetupSpecifies the mailbox for storing received documents sorted by the incoming line. Upto 200 mailboxes can be registered.NOTE: Before using this feature, select [Enabled] in the [Mailbox Selector Setup]feature on the [Fax Control] screen.• Fax Received - Line 1Specifies whether incoming documents on this line are stored in a mailbox. Select[On] to display [Mailbox Number].Output Destination SetupSpecifies the output tray for printing received documents sorted by the incoming line.The output tray for [Public Mailbox Printed Documents] can also be set.• Fax Received - Line 1Specifies the output tray.• Public Mailbox Printed DocumentsSpecifies the output tray for documents printed from public mailboxes, bothmanually and automatically using job flow sheets.Reduce/Enlarge PresetsThis feature allows you to configure or change the reduction/enlargement ratio buttonsthat appear when [Preset %] is selected on the [Reduce/Enlarge] feature on the [LayoutAdjustment] screen.1. Select [Reduce/EnlargePresets] in the [Features] menu.2. Change the required settings.Use the scroll buttons to switchbetween screens.
