6 Setups76The following explains how to adjust the fold and staple positions.1. Select [Booklet fold Position, smaller than B4] or [Booklet Fold Position, B4 orlarger], and then select [Change Settings].2. Select [Sample Printout], and then select the tray to output a sample printout for.Press the button.3. Select the option that best describes the current fold and staple positions.4. Enter the desired fold and staple positions into [A] and [B].5. Select [Adjust] to apply the settings.6. Select [Sample Printout] and then select the tray again, to output a sampleprintout. Check with the sample printout that the fold and staple positions havebeen adjusted.Delete All Certificates/Initialize Settings (WorkCentre 5225A/5230A)Deletes all certificates stored in the machine, and initializes the security settingsassociated with the certificates.WatermarkThis feature allows you to set the defaults for date and text information which can beadded to the output as a watermark, for document management control.1. Select [Watermark] in the[Features] menu.2. Change the required settings.Use the side tabs to switchbetween screens.3. Select [Close].Date FormatSpecifies the current date. Select from three date formats: 20yy/mm/dd, dd/mm/20yy,mm/dd/20yy.Default Watermark EffectSpecifies the default setting of the Text Effect feature.• OffDoes not use the Text Effect feature.• EmbossedEmbosses background text.• OutlinePrints the outline of background text.Default WatermarkSpecifies the default watermark text from a list of preset and custom text strings.Font SizeSpecifies the default watermark font size. You can select from three preset font sizesor specify a value between 24 and 80 points using the scroll buttons.
