14 Authentication and Account Administration3464. Ensure that Network Accounting is configured. Enter the machine’s IP address onyour web browser to access CentreWare Internet Services. Click the [Properties]tab, expand the [Security] folder, click [Authentication Configuration], and select[Xerox Secure Access] for [Login Type], matched to [Network Accounting] for[Accounting Type].For instructions on setting up your Network Accounting server, refer to theinstructions that came with your accounting package, as well asNetworkAuthentication Setup on page 344.You may also need another Authentication Server (running LDAP in an ADSenvironment, for example) to communicate with the Secure Access Serverproviding that server with user credentialing information. A second AuthenticationServer may be necessary for web User Interface Authentication, if this feature isadditionally desired.Configuring Xerox Secure Access to Work with Remote AuthenticationAt Your Workstation:1. Open your web browser and enter the TCP/IP address of the machine in the[Address] or [Location] field. Click [Enter] to access CentreWare Internet Services.2. Click the [Properties] tab.3. Expand the [Security] folder, and then click [Authentication Configuration]. The[Authentication Configuration > Step 1 of 2] page appears.4. Select [Xerox Secure Access] from the [Login Type] drop-down list.5. Click [Apply] to reboot the machine.6. Expand the [Security] folder, and then click [Authentication Configuration]. On the[Authentication Configuration > Step 1 of 2 area] page:a) Select the [Enabled] box for each service that you wish to restrict access to. Donot place a checkmark in the [Non-account Print] box if you wish to enable userswithout accounts to continue to print.b) Click [Apply], and then reboot the machine following the prompt.c) Click [Next]. The [Authentication Configuration > Step 2 of 2] page appears.7. On the [Authentication Configuration > Step 2 of 2] page, select [Configure] for[Authentication System]. The [Authentication System] page appears.Enabling Specific Xerox Secure Access Settings1. Open your web browser and enter the TCP/IP address of the machine in the[Address] or [Location] field. Click [Enter].2. Click the [Properties] tab.3. Expand the [Security] folder, and then the [Remote Authentication Servers] folder.4. Click [Xerox Secure Access Settings].5. In [Xerox Secure Access Settings]:a) Enter text into the [Default Prompt] and [Default Title] boxes to create the promptand prompt title that will be displayed on the machine’s screen informing usershow to authenticate themselves at the machine.
