System Settings119E-mail ControlThis feature allows you to configure or change other machine settings for sendingscanned documents as e-mail attachments.1. Select [E-mail Control] in the[Features] menu.2. Change the required settings.Use the scroll buttons to switchbetween screens.3. Select [Close].Maximum E-mail Size (WorkCentre 5222/5225/5230)Specifies whether to restrict the size of scanned data to be sent as e-mail attachments.Select [On] to enter the maximum size of data in the range from 50 to 65535 KB usingthe scroll buttons or the numeric keypad.Maximum Address EntriesSpecifies the maximum total number of To, Cc, and Bcc recipients of a single e-mail.Enter the number in the range from 1 to 100 using the scroll buttons or the numerickeypad.Incoming E-mail Print OptionsSpecifies whether to print the header and body, the subject and body, or attached filesof a received e-mail. This is effective in saving paper and printing the attached files.Print Error Notification E-mailSpecifies whether to print error notification mails automatically when e-mails are notdelivered due to an error.Response to Read ReceiptsSpecifies whether to send the processing result to the host machine when an e-mailrequesting acknowledgement is received.Read ReceiptsSpecifies whether to request destinations to send back acknowledgement whenopening e-mail.Print Delivery Confirmation E-mailSpecifies whether to automatically print out transmission confirmation e-mails.Max number of pages per Split Send (WorkCentre 5222/5225/5230)Specifies whether to split scanned data into multiple files by the selected number ofpages. Select [On] to enter the number of pages in the range of 1 to 999 using the scrollbuttons or the numeric keypad.NOTE: Scanned data can be split into multiple files when PDF or multi-page TIFF isselected as the file format.Split Send Method (WorkCentre 5225A/5230A)Specifies whether to split the data to be attached to e-mails by page or by data size.This [Split Send Method] feature is effective when a split count value is specified in[Maximum Split Count]. The option selected here will be the default setting of the Split
