6 Setups74• No ReportDoes not print a report regardless of whether data transmission is successfullycompleted or not.• Print ReportAutomatically prints a transmission report for a successful transmission, and a“Transmission Report - Job Undelivered” for a transmission failure.• Print when delivery failsPrints a “Transmission Report - Job Undelivered” for a transmission failure.File Transfer Report - Fax ServerAllows you to set whether to print a transmission report after the machine sendsscanned data using the Server Fax service.• No ReportDoes not print a report regardless of whether data transmission is successfullycompleted or not.• Print ReportAutomatically prints a transmission report for a successful transmission, and a“Transmission Report - Job Undelivered” for a transmission failure.• Print when delivery failsPrints a “Transmission Report - Job Undelivered” for a transmission failure.NOTE: When [IPv4 - IP Address] is not set under [Protocol Settings] in [Connectivity &Network Setup], no destination will be written in reports.2 Sided ReportSpecifies whether a report is to be automatically output to both sides of paper or oneside only.Recipient on Activity ReportSpecifies the section of the destination’s information to be printed on an Activity Report.Select [First 40 characters] or [Last 40 characters].Job Flow Error ReportSpecifies whether to automatically print a Job Flow Error Report.MaintenanceThis feature allows you to initialize the hard disk on the machine, to delete all documentdata stored in the machine, and to enter software options.1. Select [Maintenance] in the[Features] menu.2. Change the required settings.3. Select [Close].
