43116 AppendixThis chapter describes the machine specifications, emulation parameters supported onthe machine, how to upgrade the machine software, and how to configure XeroxExtensible Interface Platform.Specifications – page 431Emulation Parameters – page 437Machine Software Upgrade – page 440Xerox Extensible Interface Platform (XEIP) – page 441SpecificationsUse the specifications listed below to identify the capabilities of the machine. Themachine adheres to strict specifications, approvals and certifications. Thesespecifications are designed to provide for the safety of users and to ensure that themachine operates in a fully functional state. Note that improvements in specificationsand the appearance of the product may be made without prior notice.For more information on the specifications, contact your Xerox Representative.Machine SpecificationsMachine Size (Standard Configuration)With the Document Feeder and Tray 5 (Bypass):(W × D × H) 640 × 650 × 832 mm (25.2 x 25.7 x 32.8 inches).With the Document Glass Cover and Tray 5 (Bypass):(W × D × H) 640 × 652 × 751 mm (25.2 x 25.7 x 29.6 inches).Space Requirements(W × D) 1,340 × 1,185 mm (52.8 × 46.7 inches)With the Office Finisher LX: (W × D) 2,140 × 1,187 mm (84.3 × 46.7 inches)NOTE: For installations in a walkway, add an additional 610 mm (24.0 inches).Machine WeightWorkCentre with the Document Glass Cover: 64.0 kg (140.8 lb)** Including the interface cable, the Duplex unit, and the Exit 2 unit (model-A)Copier SpeedFrom Tray 1 / 1 sided:WorkCentre 5222A4/8.5 x 11" LEF: 23 cpm (cycles per minute) (1 sided)A4/8.5 x 11" LEF: 23 cpm (cycles per minute) (2 sided)A3/11 × 17” SEF: 13 cpm (cycles per minute) (1 sided)A3/11 × 17” SEF: 8 cpm (cycles per minute) (2 sided)
