Authentication/Security Settings143NOTE: For information on [Restrict User to Edit Address Book], refer toRestrict Userto Edit Address Book on page 84.Allow user to disable active settingsSpecifies whether to permit the group members to disable the Watermark featureduring their user session, when [Allow User to Disable Active Settings] in[Authentication/Security Settings] is set to [Enable Active Settings].NOTE: For information on [Allow User to Disable Active Settings], refer toAllow Userto Disable Active Settings on page 145.User Details SetupThis feature allows you to configure the settings for user ID authentication. The settingitems displayed on the screen depend on what authentication type you have selectedunder [Login Type] in [Authentication].1. Select [User Details Setup] inthe [Features] menu.2. Configure the required settings.3. Select [Save].Alternative Name for User IDDisplays a keyboard screen. Enter an alternative name for the user ID, which is to bedisplayed on the touch screen and in CentreWare Internet Services, and is to be printedon reports. The name can be up to 15 characters long.Mask User ID (***)Specifies whether to display a user ID, or hide it with asterisks on a screen.Failed Access LogDisplays the [Failed Access Log] screen. This feature allows you to specify the numberof authentication failures within a certain period before the attempt is logged as anerror.1. Select [Failed Access Log] onthe [User Details Setup] screen.2. Select [On] to enable thefeature.• Failed Attempts - Enter the maximum number of authentication failures to beallowed using the numeric keypad on the control panel.Display Login StatusSpecifies whether to display login status of the user on the upper-right corner of thelogin screen. Select [Enabled] to display, or [Disabled] to hide login status.Logout Confirmation ScreenSpecifies whether to display a logout confirmation screen every time a user session isto be ended using the button.
