Setup125Link Job Flow Sheet to MailboxDisplays the [Link Job Flow Sheet to Mailbox] screen.[Link Job Flow Sheet to Mailbox] ScreenThis feature allows you to link the mailbox to a job flow sheet that instructs howdocuments in the mailbox are to be processed. For more information on a job flowsheet, refer toCreate Job Flow Sheet on page 126.1. Select [Link Job Flow Sheet toMailbox] on the [Mailbox XXX –Create/Delete] screen andselect [Change Settings].2. Change the required settings.3. Select [Close].Cut LinkRemoves linkage with a job flow sheet if any linkage has already been made.Create/Change LinkAllows you to select a job flow sheet to be linked with the mailbox. For the displayed[Sheet Filtering], [Create], and [Edit/Delete] buttons, refer toCreate Job Flow Sheet onpage 126.NOTE: The [Auto Start] check box and the [Start] button also appear on the [Link JobFlow Sheet to Mailbox] screen when the mailbox has been linked with any job flowsheet. Checking the [Auto Start] check box causes the linked job flow sheet to beautomatically executed when a new document is saved in the mailbox. Selecting[Start] causes the execution of the linked job flow sheet to be started.Stored ProgrammingThis feature allows you to register a series of operations with job numbers.Registering Operations with a Job NumberYou can store up to 58 consecutive operations for each job number. To register therequired operations with a job number, follow the steps below.1. Select [Stored Programming] inthe [Group] menu.2. Select [Store], and then select ajob number that reads “Not inUse”.3. Perform the operations to be stored for the job number.NOTE: You can store operations performed on the control panel, except operationsperformed in the [Setup] menu on the [Tools] screen.4. Press the or button on the control panel.StoreSelecting this button and then selecting a job number allows you to register a series ofoperations with the job number. To complete registering operations, press the or button on the control panel.
