System Settings67Auto ClearSpecifies whether to automatically display the default screen if you do not perform anyoperation within the selected period of time. Select [On] and then select the time periodin the range from 30 to 900 seconds.Auto Job ReleaseSpecifies whether to automatically release the current job to allow execution of the nextjob, if a problem such as a paper jam interrupts the current copy or scan job and is notresolved within the selected period of time. Select [On] and then select the time periodin the range from 4 to 99 minutes.Auto PrintSpecifies whether to automatically print jobs if you do not perform any operation withinthe selected period of time. Select [On] and then select the time period in the rangefrom 1 to 240 seconds.Printer Lockout DurationSpecifies whether to prohibit printing of incoming documents (for example, faxes) for aspecified duration. Select [On] and then specify the start and end times of the intervalduring which printing will be prohibited.Power Saver/Energy Saver TimersSpecifies the time interval of inactivity before automatically switching the machine toLow Power Mode, a second time interval of inactivity before switching to Sleep Mode.Select the time period for each mode in the range from 2 to 60 minutes. You must selecta longer time period for the Sleep Mode than for the Low Power Mode.Audio TonesThis feature allows you to select the volume level of tones to be generated at variousoccasions. You can choose different volume levels for each item shown on the screen.1. Select [Audio Tones] in the[Features] menu.2. Change the required settings.Use the side tabs to switchbetween screens.3. Select [Close].Control Panel Select ToneSpecifies the volume level of the tone generated when an appropriate button on thecontrol panel is pressed and its action is accepted.Control Panel Alert ToneSpecifies the volume level of the tone generated when an inappropriate button on thecontrol panel is pressed.Machine Ready ToneSpecifies the volume level of the tone generated when the machine becomes ready tocopy or print, for example, after the power is switched on.
