13 Security - Encryption/Digital Signature3088. Click [+] on the left of the [Security] folder to display the items in the folder.9. Click [SSL/TLS Settings].10. Select the [Enable] check box for [HTTP - SSL/TLS Communication].11. Check [HTTP - SSL/TSL Communication Port Number].12. Apply the settings.a. Click [Apply].b. The right frame on the web browser will change to the machine reboot display.c. Click [Reboot Machine]. The machine will be unavailable for a short period oftime.Configuration on a ComputerThe following describes the configuration for a computer.When encrypting communication between a web browser and the machine, enter anaddress beginning with "https" instead of "http" into the address column in the webbrowser.Example: https://192.168.1.1/When encrypting IPP communications (Internet printing), enter an address beginningwith "https", instead of "http", as the URL of a printer that is selected from [Add Printer].NOTE: You will typically be presented with a Digital Certificate, which you need toaccept in order to send encrypted files to the device. Digital Certificates represent thePublic Key of the machine to which you are sending and must be accepted in order toallow the encryption process to take place.No settings are needed to use the SOAP or WebDAV port.Configuration of E-mail Encryption/Digital SignatureInstallation OverviewConfiguration on the MachineImport an S/MIME certificate from a Certificate Authority (in PKCS7 format), and thenconfigure the certificate on the machine using CentreWare Internet Services.Configuration on a ComputerNo special configuration is needed for remote computer receipt of encrypted e-mail. Forsending encrypted e-mail to the machine, however, you will need a copy of themachine’s S/MIME certificate on your computer to allow you to encrypt email to be sentto the machine. The S/MIME certificate represents the Public Key of the machine,allowing encryption to take place.Configuring S/MIME Certificates with CentreWare Internet ServicesTo configure S/MIME certificates with CentreWare Internet Services, first enable HTTPcommunications (as stated under Configuration of HTTP Communication Encryption inthis section). Next, import an S/MIME certificate from a Certificate Authority (in PKCS7format). Finally, enable S/MIME.1. Start a web browser.
