Setup123Job Flow Service SettingsThis feature allows you to configure the settings for accessing a pool server. A poolserver is a remote server that stores and manages job flow sheets.To use a pool server, the machine must be registered on the pool server in advance.1. Select [System Settings], andthen select [Job Flow ServiceSettings] in the [Group] menu.2. Select the required setting.Pool ServerSpecifies whether to use a pool server.Pool Server Login MethodSpecifies the pool server login method. Selecting [Show login screen] displays a loginscreen to enter the login name and the password each time the machine accesses thepool server.Job Flow Sheet List DefaultSpecifies the default job flow sheet list to be displayed on the [Job Flow Sheets] screen.Selecting [Local Machine] displays the job flow sheet list stored in the machine.Selecting [Pool Server] displays the list stored in the pool server.Fax Transfer Resolution (WorkCentre 5225A/5230A)Specifies the resolution to be used when color data is transferred by fax. Select [SameResolution (High Quality)] to transfer data at the same resolution as the scanresolution. Select [200 dpi (High Speed)] to transfer data at a resolution of 200 dpi.SetupThis section describes the Setup menu that is also available for general users. In thismenu, you can register various items such as mailboxes, destination addresses and jobflow sheets. For more information, refer to the following:Create Mailbox – page 124Stored Programming – page 125Create Job Flow Sheet – page 126Create Job Flow Sheet Keyword – page 129Add Address Book Entry – page 129Create Fax Group Recipients – page 132Add Fax Comment – page 133Paper Tray Attributes – page 1331. Select [Setup] on the [Tools]screen.2. Select a group in the [Group]menu.
