15 Problem Solving428Screen MessagesAlong with fault codes, the following messages are displayed on the touch screen onsome occasions.133-210133-211133-212133-213133-214133-215133-216133-217133-218133-219133-220133-221133-222133-223133-224A fax error occurred. Switch off the machine, and then switch it on again.Contact the Xerox Welcome Center if the problem persists.133-226 The specified country code is not supported. Contact the Xerox WelcomeCenter.133-280133-281133-282133-283A fax error occurred. Switch off the machine, and then switch it on again.Contact the Xerox Welcome Center if the problem persists.133-700 The staple/punch settings were cancelled. Specify appropriate staple/punchpositions.133-710 The received fax data was printed using Tray 5 (Bypass), as the selected traywas not available for fax printing.134-210134-211A fax error occurred. Switch off the machine, and then switch it on again.Contact the Xerox Welcome Center if the problem persists.Code Description and RemedyMessage Description and RemedyA fault has occurred.Switch off the machine. Ensure that thescreen disappears before switching it on.If the problem persists, call for service.A fault has occurred. Switch off the machineand wait until the touch screen is completelyoff, and then restart the machine. If theproblem persists, write down the fault code(xxx-yyy) displayed on the screen. Switch offthe machine and contact the Xerox WelcomeCenter.A fault has occurred. The machine hasrebooted. If the problem persists, call forservice.The machine was restarted due to a fault.Resume normal operations. If the problempersists, contact the Xerox Welcome Center.Processing has been cancelled due to anerror.See User Guide for information on fault code.The machine operation has stopped due to afault. Restart the job.
