5 Scan/E-mail128 Xerox WorkCentre 7132 User GuidePasswordAllows you to specify the password if required by the destination server. Select a serverfrom the address book to display the preset password or select [Password] and entera password using the [Keyboard] screen. Leave the password field blank if you do notwant to assign a password.Transfer ProtocolThis feature allows you to select the transfer protocol. You must select the sameprotocol used by the destination.1. Select [Transfer Protocol] on the[Scan to FTP/SMB] screen.2. Select the required option.3. Select [Save].FTPSpecifies the FTP protocol.SMBSpecifies the SMB protocol.SMB (UNC Format)Specifies the SMB protocol (using the UNC format).NOTE: If Remote Authentication has been enabled, a popup message will prompt theuser to enter a login and password before using the Scan to FTP/SMB feature. Thelogin and password will be passed to the Kerberos server. Only when the user hasbeen authenticated (for example, User xyz really is user xyz), the feature will be madeavailable.Address BookThis feature allows you to select a destination server from the address book. Selectinga server causes the preset information to be entered into the entry fields: Server,Shared Name, Save In, Login Name, and Password. For information on how to registerdestinations, refer to Address Book in the Setups chapter on page 290.1. Select [Address Book] on the[Scan to FTP/SMB] screen.2. Select the required option.3. Select [Save].DetailsDisplays the detailed settings of the selected server.Downloaded From ManualsPrinter.com Manuals