10 Setups222 Xerox WorkCentre 7132 User GuideNTP Time SynchronizationSpecifies the parameters used to synchronize the time of the machine with that of thespecified time server using the Network Time Protocol (NTP).NOTE: If the time server connection fails, the machine maintains its own time withoutsynchronization.Connection to Time ServerSpecifies whether to enable the connection to a time server.Connection IntervalSpecifies the time span between connections to the specified server, in the range from1 to 500 hours.Time Server IP AddressSpecifies the IP address of the time server using the numeric keypad on the controlpanel.Auto ClearSpecifies whether to automatically display the default screen if you do not perform anyoperation within the selected period of time. Select [On] and then select the time periodin the range from 30 to 240 seconds.Auto Job ReleaseSpecifies whether to automatically release the current job to allow execution of the nextjob, if a problem such as a paper jam interrupts the current copy or scan job and is notresolved within the selected period of time. Select [On] and then select the time periodin the range from 4 to 99 minutes.Auto PrintSpecifies whether to automatically print jobs if you do not perform any operation withinthe selected period of time. Select [On] and then select the time period in the rangefrom 1 to 240 seconds.Printer Lockout DurationSpecifies whether to prohibit printing of incoming documents (for example, faxes) for aspecified duration. Select [On] and then specify the start and end times of the intervalduring which printing will be prohibited.Auto Power SaverSpecifies the time interval of inactivity before automatically switching the machine toLow Power Mode, a second time interval of inactivity before switching to Sleep Mode.Select the time period for each mode in the range from 1 to 240 minutes. You mustselect a longer time period for the Sleep Mode than for the Low Power Mode.Downloaded From ManualsPrinter.com Manuals
