10 Setups276 Xerox WorkCentre 7132 User GuideNOTE: When setting the box selector feature, select a mailbox that has already beenregistered. If an unregistered mailbox is selected, the received document isautomatically printed instead of stored in a mailbox.Memory Full ProcedureSpecifies the default process to execute if the hard disk becomes full while readingdocuments. A message asking how to process the data read up to that point isdisplayed. You can predefine a processing method to be performed after the messagehas been displayed for a specified period. If you select [Cancel Job], the data will bediscarded. If you select [Run Job], the data read up to that point will be processed.Maximum Stored PagesSpecifies the maximum number of pages that can be stored in memory when you copydocuments. Select a number in the range from 1 to 999.Mailbox Receive Display Priority 1 to 3Specifies the display priority to the fax documents in the mailboxes. Select from [FCode], [Remote Terminal ID], and [Remote Terminal Name].File Destination/Output DestinationThis feature allows you to sort received documents by incoming line to specifiedmailboxes or to the output trays.1. Select [File Destination/OutputDestination] on the [Fax ModeSettings] screen.2. Change the required settings.3. Select [Close].File Destination - Line SetupSpecifies the mailbox for storing received documents sorted by the incoming line. Upto 200 mailboxes can be registered.NOTE: Before using this feature, select [Enabled] in the [Box Selector - Line Setup]feature on the [Fax Control] screen.Line 1, 2, and 4Specifies whether the incoming documents on this line are stored in a mailbox. Select[On] to display the [Mailbox Number].Output Destination - Line SetupSpecifies the output tray for printing received documents sorted by the incoming line.The output tray for [Mailbox Printed Documents] can also be set.Downloaded From ManualsPrinter.com Manuals
