5 Scan/E-mail138 Xerox WorkCentre 7132 User GuideTop Page then BottomScans pages of an open book in the direction from top to bottom.• Both Pages - Scans both the left and right pages.• Top Page Only - Scans the top pages only.• Bottom Page Only - Scans the bottom pages only.Binding EraseErases the center binding area of the book that tends to be shadowed due to the foldin the pages. Use the scroll buttons to specify the area to be erased from the center ofan open book within the range of 0-50 mm (0.0-2.0 inches) in 1 mm (0.1) inchincrements.Original SizeThis feature allows you to set the size of the document automatically, to select from alist of preset sizes, or to mix different size documents. If you select a preset size,documents will be scanned according to the specified size regardless of their actualsize.1. Select [Original Size] on the[Layout Adjustment] screen.2. Select the required options.3. Select [Save].Auto DetectAutomatically detects the size of standard sized documents.Manual Size InputAllows you to select the input size from the 11 preset standard sizes in portrait orlandscape orientations, or select a custom size within the ranges of 15-297 mm (0.6-11.7 inches) for length and 15-432 mm (0.6-17.0 inches) for width. The presets are setup by the Key Operator.Mixed Sized OriginalsAllows you to scan more than one original size document. The machine senses themixed sized originals automatically, and scans each document at the same size as theoriginals. Load different size documents, with top left corners aligned, into theDocument Feeder.NOTE: 5.5 × 8.5" and A5 originals must be loaded in portrait orientation.Downloaded From ManualsPrinter.com Manuals