SMart Kit (Customer Replaceable Units)Xerox WorkCentre 7132 User Guide 365Second Bias Transfer Roll UnitThe Second Bias Transfer Roll unit lasts approximately 150,000 copies and prints. Themachine will display a warning message approximately 1,500 copies and prints beforethe unit reaches the end of its life. Another message will be displayed at this point whenthe unit needs to be replaced.CAUTION: The left-hand cover should not be opened while the machine is operating.If the left-hand cover is opened, the machine automatically stops. Push firmly to closethe cover, as it may become difficult to close. Follow the messages on the screen, ifpresent, to remove any paper jammed in the machine.Removing the Old Second Bias Transfer Roll Unit1. Select [Second Bias Transfer Roll] on the [Supplies] screen or the [ConsumablesStatus] screen.2. Pull the side cover open.3. Loosen the two screws securingthe Second Bias Transfer Rollunit by rotating themanticlockwise.4. Hold the loosened screws toremove the Second BiasTransfer Roll unit from themachine.NOTE: Be careful when handling theSecond Bias Transfer Roll to avoidcontact with any residue toner left onthe unit.NOTE: Make sure not to hold anyother parts other than screws to remove, in order to avoid deforming the metal part ofthe Second Bias Transfer Roll unit to prevent potential paper jams.Downloaded From ManualsPrinter.com Manuals
