10 Setups224 Xerox WorkCentre 7132 User GuideLine Monitor VolumeSpecifies the volume level of the tone generated for the line monitor, which allows youto hear call and response signals when connecting to a destination.Ringing VolumeSpecifies the volume level of the tone generated when a call is received.Stored Programming ToneSpecifies the volume level of the tone generated each time operation is performedduring job memory registration. You cannot completely turn off the volume for this tone.Auto Clear Alert ToneSpecifies the volume level of the tone generated just before the machine performs autoclear.Base ToneSpecifies the volume level of the base tone generated when you toggle settings. Themachine emits a base tone when it exits the interrupted mode.Screen/Button SettingsThis feature allows you to customize the initial screen and select the initial language tobe displayed on the touch screen.1. Select [Screen/Button Settings]on the [Common Settings]screen.2. Change the required settings.Use the side tabs to switchbetween screens.3. Select [Close].Screen Default at Power OnSpecifies the initial screen to be displayed when the machine is switched on. Set thepreset initial screen to the Features, Job Status, or the Machine Status screen. Forinformation on these screens, refer to the Job Status chapter and the Machine Statuschapter.Features Screen DefaultSpecifies the default features to be displayed when canceling the Power Saver mode.Use the scroll bars to switch between screens.Screen After Auto ClearSpecifies the features screen to be displayed after the machine performs auto clear.Downloaded From ManualsPrinter.com Manuals
