3 Copy72 Xerox WorkCentre 7132 User GuideCovers• Blank Covers - Adds a blank cover to the booklet.• Printed Covers - Copies the first page of the set of documents onto the cover stock.Add blank sheets to the set of documents if you want the inside front and backcovers to remain blank.Paper Tray SettingsDisplays the [Booklet Creation - Covers - Paper Tray Settings] screen. Select one ofthe presets to specify [Main Body Tray] and [Covers Tray]. The paper loaded in thetrays selected for [Main Body Tray] and [Covers Tray] should be the same size andorientation. Four presets, including the bypass tray, are available for each, dependingon your machine configuration. For more information on the bypass tray, refer to [Tray5 (Bypass)] Screen on page 53.[Booklet Creation - Divide Output] ScreenAllows you to subdivide a large booklet into many booklets.1. Select [Booklet Creation - DivideOutput] on the [BookletCreation] screen.2. Select the required option.3. Select [Save].OffDisables the feature.OnSubdivides the booklet into subsets. Enter the number of sheets in each subset usingthe scroll bars or numeric soft keys.CoversThis feature allows you to add a front and/or back cover to a copy job. If [PrintedCovers] on the [Booklet Creation - Covers] screen is selected, the first original will bethe front cover and the last original will be the back cover.NOTE: If the machine’s memory becomes full while scanning a document with thisfeature enabled, follow the instructions on the screen to cancel the job. Delete thestored documents, or reduce the amount of pages to free some memory and try again.NOTE: This feature is unavailable when [Uncollated] or [With Separators] is selectedin [Copy Output].Downloaded From ManualsPrinter.com Manuals