10 Setups270 Xerox WorkCentre 7132 User GuideVariable %Specifies the reduce/enlarge ratio set using the scroll bars from 25% to 400% in 1%increments.Other SettingsThis feature allows you to configure or change other machine settings specific to thescan features.1. Select [Other Settings] on the[Scan Mode Settings] screen.2. Change the required settings.Use the scroll buttons to switchbetween screens.3. Select [Close].Scan ServiceSpecifies whether to enable the scanner function.Memory Full ProcedureSpecifies the default process to execute if the hard disk becomes full while readingdocuments. A message asking how to process the data read up to that point isdisplayed. You can predefine a processing method to be performed after the messagehas been displayed for a specified period. If you select [Cancel Job], the data will bediscarded. If you select [Run Job], the data read up to that point will be processed.Maximum Stored PagesSpecifies the maximum number of pages to be stored in memory through scanning.Select a number in the range from 1 to 999.SaturationSpecifies the color saturation when scanning a full-color document. Scans areautomatically adjusted.Background Suppression LevelSpecifies the background suppression level when scanning a document in color.Shadow Suppression LevelSpecifies the shadow suppression level when scanning a document in color.Color SpaceSpecifies whether to display the color space feature. Select [Enabled] to display the[Color Space] feature on the [Image Quality] screen for the [E-mail], [Scan to Mailbox],[Scan to FTP/SMB], and [Network Scanning] functions.Downloaded From ManualsPrinter.com Manuals
