Layout AdjustmentXerox WorkCentre 7132 User Guide 65Left Page then RightCopies both pages of an open book in the direction from left to right.Right Page then LeftCopies both pages of an open book in the direction from right to left.Top Page then BottomCopies both pages of an open book in the direction from top to bottom.Start Page & End PageDisplays the [2 Sided Book Copy - Start Page & End Page] screen.Specifies the start page and the end page for copying. The specified page sides mustbe identified using the bound original.Binding EraseErases printing of the center binding area of the book that tends to be shadowed dueto the fold in the pages. Use the scroll buttons to specify the area to be erased from thecenter of an open book within the range of 0-50 mm (0.0-2.0 inches) in 1mm (0.1 inch)increments.Original SizeThis feature allows you to set the size of the document automatically, to select from alist of preset sizes, or to mix different size documents. If you select a preset size,documents will be copied according to the specified size regardless of their actual size.1. Select [Original Size] on the[Layout Adjustment] screen.2. Select the required option.3. Select [Save].Auto DetectAutomatically detects the size of standard sized documents.Manual Size InputAllows you to select the input size from the 11 preset standard sizes in portrait orlandscape orientations, or select a custom size within the ranges of 15-297 mm (0.6-11.7 inches) for length and 15-432 mm (0.6-17.0 inches) for width. The presets are setup by the Key Operator.Mixed Sized OriginalsAllows you to copy more than one original size document. The machine senses themixed sized originals automatically, and copies each document at the same size as theoriginals. Load different size documents, with top left corners aligned, into theDocument Feeder.Downloaded From ManualsPrinter.com Manuals
