8 CentreWare Internet Services204 Xerox WorkCentre 7132 User GuideEmulation Settings PCLThis page allows you to configure the settings when PCL is enabled.Paper Tray – Allows you to select the paper tray.Output Size – Allows you to select the paper size.Paper Size (Bypass) – Allows you to select the paper size for Tray 5(Bypass).Custom Paper Size:Width X – Allows you to specify a paper sizewidth.Custom Paper Size:Length Y – Allows you to specify a paper sizelength.Output Destination – Allows you to select the destination for youroutput.Quantity – Allows you to specify the number of sets to print between1 and 999.2 Sided Print – Allows you to select whether to print both sides ofpaper.Image Orientation – Allows you to select the image orientation.Form Lines – Allows you to specify the page length (printing area) ofone page.Font – Allows you to select the required font from the list of fontsavailable.Font Size – Allows you to specify the font size between 4.00 and50.00 points in 0.25 point increments.Font Pitch – Allows you to specify the font pitch between 6.00 and24.00 points in 0.01 point increments.Symbol Set – Allows you to select the desired symbol set from the listof symbol sets available.Handle CR As – Allows you to enable or disable carriage return andline feed for the PCL mode.Handle LF and FF As – Allows you to enable or disable carriagereturn and line feed, and also carriage return and form feed, for thePCL mode.HexDump – Allows you to enable or disable hexadecimal memorydump for the PCL mode.Image Enhancement – Allows you to enable or disable imageenhancement.Output Color – Allows you to select the output color mode.Macro Management – Allows you to use Macro.Font Management – Allows you to add/delete fonts.Paper Supply Command – Allows you to refer to the paper supplylist.Feature Setting itemsDownloaded From ManualsPrinter.com Manuals
