Scan Mode SettingsXerox WorkCentre 7132 User Guide 265Unregistered FormsSpecifies whether to abort a job which is specified to use form overlay when the formis not found (not registered) in the machine.Print User IDSpecifies whether to print the user ID or the position to print the ID, when printing usinga printer driver to distinguish between users. The user ID is a maximum of 64characters set by the printer driver. For more information, refer to the printer driveronline help.Banner SheetSpecifies whether to add sorting sheets (banner sheets). This is effective for sorting/classifying to differentiate printed sheets from the rest. You can add banner sheetsbefore and/or at the end of the print job.NOTE: Even if using the Finisher, banner sheets will not be stapled. Banner sheetsfrom print jobs from a Macintosh do not display the document name. Printing bannersheets also increments the billing meter.Banner Sheet TraySpecifies a tray for the banner sheets.PostScript Default ColorSpecifies the output color default for AdobePS and PDF.PostScript Paper SupplySpecifies whether to use the DMS (Deferred Media Selection) feature of PostScript orto select a paper tray.PostScript Font AbsenceSpecifies whether to substitute fonts automatically and continue the print job when arequired font is not found. The substitute font is Courier.NOTE: This feature is available only when PostScript is loaded.PostScript Font SubstitutionSpecifies whether to use ATCx during font substitution.NOTE: This feature is available only when PostScript is loaded.Scan Mode SettingsThis section describes the features that allow you to configure or change machinesettings specific to the scan features. For more information, refer to the following.Scan Defaults – page 266Downloaded From ManualsPrinter.com Manuals
