Machine StatusXerox WorkCentre 7132 User Guide 315Overwrite Hard DiskThis feature displays the overwriting status of the hard disk.NOTE: This option is displayed if the feature is enabled in the System Settings by theKey Operator.1. Select [Overwrite Hard Disk] onthe [Machine Status] screen.Print ModeThis feature allows you to change the default printer mode and emulation parametersettings.For the lists of emulation parameters and their values, refer to Emulation Parametersin the Print chapter on page 156.1. Select [Print Mode] on the[Machine Status] screen.2. Select the required option.Off-lineTakes the printer off-line. The printer is unavailable in this mode.On-linePuts the printer on-line, ready to accept data.PCL EmulationAllows you to set parameter values for PCL emulation to print documents. For a list ofparameters, refer to PCL Emulation on page 156.1. Select [PCL Emulation] on the[Print Mode] screen.2. Enter a 3-digit parameter itemnumber in the [Item Number]field.3. Select [Change Value] to change the displayed value, or select [Confirm] if nochange is required.4. If you selected [Change Value], enter the required value in the [New Value] field.5. Select [Save].Downloaded From ManualsPrinter.com Manuals
