Fault CodesXerox WorkCentre 7132 User Guide 419027-588 An SMB protocol error occurred. The user account is disabled. Ask the SystemAdministrator to enable the user.027-589 An SMB protocol error occurred. The user account is locked out. Ask theSystem Administrator to release the lockout.027-590 An SMB protocol error occurred. The user valid interval has expired. Obtain avalid user account from the System Administrator, or ask the SystemAdministrator to extend the account interval.027-591 An SMB protocol error occurred. The user account is restricted. The blankpassword is invalid. Set the user account password.027-593027-599An SMB protocol error occurred. Perform the same operation again. Contact theXerox Welcome Center if the problem persists.027-706 There was no S/MIME certificate tied to the e-mail address when sending e-mail. Import an S/MIME certificate for the e-mail address into the machine.027-707 The S/MIME certificate tied the e-mail address when sending e-mail hasexpired. Obtain a new S/MIME certificate, and import into the machine.027-708 The S/MIME certificate tied the e-mail address when sending e-mail isuntrusted. Import a trusted S/MIME certificate into the machine027-709 The S/MIME certificate tied the e-mail address when sending e-mail has beenrevoked. Import a new S/MIME certificate into the machine027-710 The S/MIME certificate to receive e-mail was not present. Contact the sender,and ask them to send e-mail with an S/MIME certificate.027-711 The sender’s S/MIME certificate was not retrieved from the received e-mail.Import the sender’s S/MIME certificate into the machine, or attach an S/MIMEcertificate to the sender’s S/MIME signature e-mail.027-712 The received e-mail S/MIME certificate has expired or is untrusted. Contact thesender, and ask them to send e-mail with a valid certificate.027-713 The received e-mail was rejected, because it had been altered, possibly thetransmission route had been falsified. Contact the sender to notify them aboutthe possibility of falsification, and request them to resend the e-mail.027-714 The received e-mail was rejected, because the “From” field differs from theS/MIME signature e-mail address. Contact the sender, tell them about thepossibility of impersonation, and ask them to resend the e-mail.027-715 The received e-mail S/MIME certificate is not registered on the machine or is notsupported on the machine. Import the sender’s S/MIME certificate into themachine, or if already registered, enable the certificate so that it can be used onthe machine.027-716 The received e-mail was rejected, because the S/MIME certificate wasuntrusted. Contact the sender, and ask them to send e-mail with a trustedcertificate.Code Description and RemedyDownloaded From ManualsPrinter.com Manuals
