Network SettingsXerox WorkCentre 7132 User Guide 249PJLSpecifies whether to enable the PJL (Printer Job Language).Auto Eject TimeSpecifies the time-out period when print data is not sent to the machine sequentially. Ifthe specified time elapses, the remaining data inside the machine is automaticallyprinted out. You can enter a time within the range of 5-1,275 seconds in 5-secondincrements.Adobe Communication ProtocolSpecifies the communication protocol format for Adobe Communication Protocol.• Standard - Select this option when the communication protocol is in the ASCIIformat.• Binary - Select this option when the communication protocol is in the binary format.Depending on the data, the print job may be completed faster than [Standard].• TBCP - Select this option to switch the specific control codes when thecommunication protocols involve both ASCII and binary formats.LPDSpecifies whether to enable the LPD port and set the port number.NetWareSpecifies whether to enable the NetWare port.SMBSpecifies whether to enable the SMB port.IPPSpecifies whether to enable the IPP port and set the port number.EtherTalkSpecifies whether to enable the EtherTalk port.BonjourSpecifies whether to enable the Bonjour port.SalutationSpecifies whether to enable the Salutation port.Port 9100Specifies whether to enable the Port 9100 port and set the port number.Downloaded From ManualsPrinter.com Manuals
