16 Specifications434 Xerox WorkCentre 7132 User GuideCopier SpeedFrom Tray 1/One-sided:WorkCentre 7132A4/Letter LEF: 32 cpm (cycles per minute) black and white, 8 cpm color (1 sided)A4/Letter LEF: 21.3 cpm (cycles per minute) black and white, 8 cpm color (2 sided)A3/11 × 17” SEF: 16 cpm (cycles per minute) black and white, 4 cpm color (1 sided)A3/11 × 17” SEF: 10.7cpm (cycles per minute) black and white, 4 cpm color (2 sided)First Copy Out TimeFrom Tray 1/A4 or Letter LEF: 7.4 seconds (black and white), 18.7 seconds (color)Warm-up TimeCold Start: Approximately 42 seconds (varies with machine configuration)Document GlassCapacity: A document within 30 mm of thickness can be copied with the documentglass cover / feeder closed.Document Sizes: (Standard size) A5 LEF to A3 SEF(Custom size) width: 15 to 297 mm (0.6 to 11.7”) / length: 15 to432 mm (0.6 to 17.0”).Document Weights: 38 to 128 g/m 2 (50 to 128 g/m 2 in double-sided mode)Auto Size Sensing: YesNOTE: The standard sizes of documents that can be detected vary depending on thepaper size table specified by the Key Operator. For information on setting the papersize table, refer to Paper Size Settings in the Setups chapter on page 234.Document FeederCapacity: 50 sheets of 38 to 128 g/m 2 (50 to 128 g/m 2 in double-sided mode)Document Sizes: (Standard size) A5 to A3 SEF (5.5 × 8.5” to 11 × 17” SEF)(Custom size) for width: 139.7 to 297 mm (5.5 to 11.7”) / for length:210 to 432 mm (8.3 to 17.0”).Long Document Scan Feature: 297 × 600 mm (11.7 × 23.6”)maximum lengthNOTE: This feature is not available in the double-sided mode. When using this featureto scan long documents which exceed 432 mm (17.0 inches), the operator must feedthe document one sheet at a time. The paper weight should be between 60 and 90 g/m 2.Document Weight: 38 to 128 g/m2 (50 to 128 g/m2 in double-sided mode)Mixed Sizes: Yes - if so specified on the machine and the lead edges of documentshave the same dimension.Auto Size Sensing: YesDownloaded From ManualsPrinter.com Manuals
