Yamaha YZF-R1(B) 2012 Service Manual

Also see for YZF-R1 2012: Service manual

Contents

PERIODIC MAINTENANCE3-127. Check:• Tightening torque8. Install:• Radiator lower bracketRefer to “RADIATOR” on page 6-1.9. Install:• Rear brake master cylinderRefer to “REAR BRAKE” on page 4-44.10. Install:• Side cowlingsRefer to “GENERAL CHASSIS” on page4-1.11. Install:• Passenger seatRefer to “GENERAL CHASSIS” on page4-1.12. Install:• Rider seatRefer to “GENERAL CHASSIS” on page4-1.EAS20600ADJUSTING THE EXHAUST GAS VOLUMETIPBe sure to set the CO density level to stan-dard, and then adjust the exhaust gas volume.1. Turn the main switch to “OFF” and set theengine stop switch to “ON”.2. Simultaneously press and hold the“SELECT” and “RESET” buttons, turn themain switch to “ON”, and continue to pressthe buttons for 8 seconds or more.TIP“dIAG” appears on the odometer, tripmeter andfuel reserve trip LCD.3. Press the “SELECT” button to select theCO adjustment mode “CO” or the diagnos-tic mode “dIAG”.4. After selecting “CO”, simultaneously pressthe “SELECT” and “RESET” buttons for 2seconds or more to execute the selection.Exhaust pipe nut20 Nm (2.0 m·kgf, 14 ft·lbf)Exhaust pipe and exhaustchamber clamp bolt10 Nm (1.0 m·kgf, 7.2 ft·lbf)Exhaust pipe and exhaust pipestay bolt20 Nm (2.0 m·kgf, 14 ft·lbf)Exhaust chamber bracket bolt20 Nm (2.0 m·kgf, 14 ft·lbf)Exhaust chamber bolt20 Nm (2.0 m·kgf, 14 ft·lbf)Exhaust chamber and left muf-fler bolt20 Nm (2.0 m·kgf, 14 ft·lbf)Exhaust chamber and right muf-fler bolt20 Nm (2.0 m·kgf, 14 ft·lbf)Left muffler and frame bolt23 Nm (2.3 m·kgf, 17 ft·lbf)Right muffler and frame bolt23 Nm (2.3 m·kgf, 17 ft·lbf)