ELECTRIC STARTING SYSTEM8-11EAS27190TROUBLESHOOTINGThe starter motor fails to turn.TIP• Before troubleshooting, remove the following part(s):1. Rider seat2. Passenger seat3. Heat protector4. Side cowlingsNG→OK↓NG→OK↓OK→NG↓NG→OK↓NG→OK↓NG→OK↓NG→OK↓1. Check the fuses.(Main and ignition)Refer to “CHECKING THE FUSES”on page 8-129.Replace the fuse(s).2. Check the battery.Refer to “CHECKING ANDCHARGING THE BATTERY” onpage 8-129.• Clean the battery terminals.• Recharge or replace the battery.3. Check the starter motor operation.Refer to “CHECKING THESTARTER MOTOR OPERATION”on page 8-138.Starter motor is OK. Perform the elec-tric starting system troubleshooting,starting with step 5.4. Check the starter motor.Refer to “CHECKING THESTARTER MOTOR” on page 5-47.Repair or replace the starter motor.5. Check the relay unit (starting circuitcut-off relay).Refer to “CHECKING THERELAYS” on page 8-133.Replace the relay unit.6. Check the relay unit (diode).Refer to “CHECKING THE RELAYUNIT (DIODE)” on page 8-135.Replace the relay unit.7. Check the starter relay.Refer to “CHECKING THERELAYS” on page 8-133.Replace the starter relay.
