FRONT FORK4-688. Install:• Dust seal “1”(with the fork seal driver weight “2”)9. Install:• Rod puller “1”• Rod puller attachment “2”(onto the damper rod “3”)10. Fully compress the front fork leg.11. Fill:• Front fork leg(with the specified amount of the recom-mended fork oil)ECA14B1008• Be sure to use the recommended fork oil.Other oils may have an adverse effect onfront fork performance.• When disassembling and assembling thefront fork leg, do not allow any foreignmaterial to enter the front fork.12. After filling the front fork leg, slowly strokethe damper rod “1” up and down (at leastten times) to distribute the fork oil.TIPBe sure to stroke the damper rod slowlybecause the fork oil may spurt out.13. Before measuring the fork oil level, wait tenminutes until the oil has settled and the airbubbles have dispersed.Fork seal driver90890-01442Adjustable fork seal driver (36–46 mm)YM-01442Rod puller90890-01437Universal damping rod bleedingtool setYM-A8703Rod puller attachment (M10)90890-01436Universal damping rod bleedingtool setYM-A8703Quantity528.0 cm³ (17.85 US oz, 18.62Imp.oz)Recommended oilSuspension oil M1 or equiva-lent
