TRANSMISSION5-983. Install:• Shift fork-C “1”• Shift drum assembly “2”• Shift fork guide bar “3”TIP• The embossed marks on the shift forksshould face towards the right side of theengine and be in the following sequence: “R”,“C”, “L”.• Carefully position the shift forks so that theyare installed correctly into the transmissiongears.• Install shift fork-C into the groove “a” in the3rd and 4th pinion gear on the main axle.4. Install:• Shift fork-R “1”• Shift fork-L “2”• Shift fork guide bar• Springs• Shift drum retainers “3”• Bearing• Oil seal• Circlip “4”• Drive axle assembly “5”TIP• Install shift fork-R into the groove “a” in the5th wheel gear and shift fork-L into thegroove “b” in the 6th wheel gear on the driveaxle.• Install the shift drum retainer with its “OUT”mark “c” facing outward.• Make sure that the drive axle bearing circlip“4” is inserted into the grooves “d” in theupper crankcase.5. Check:• TransmissionRough movement → Repair.TIPOil each gear, shaft, and bearing thoroughly.Shift drum retainer bolt10 Nm (1.0 m·kg, 7.2 ft·lb)LOCTITE®NewNew
