Yamaha YZF-R1(B) 2012 Service Manual

Also see for YZF-R1 2012: Service manual

Contents

FEATURES1-11ResettingThe traction control system may be disabled in the following conditions:• Either the front wheel or rear wheel comes off the ground while riding• Excessive rear wheel spinningIf the traction control system has been disabled, both the traction control system indicator/warninglight and the engine trouble warning light come on.To reset the traction control system:Turn the key to “OFF”. Wait at least one second, then turn the key back to “ON”. The traction controlsystem indicator/warning light should go off and the system will be enabled. The engine troublewarning light should go off after the motorcycle reaches at least 20 km/h (12 mi/h). If the tractioncontrol system indicator/warning light and/or engine trouble warning light still remain on after reset-ting, check the fuel injection system (Refer to “FUEL INJECTION SYSTEM” on page 8-33).ECA1KB8101• Keep any type of magnets (including magnetic pick-up tools, magnetic screwdrivers, etc.)away from the front and rear speed sensor or front speed sensor rotor; otherwise, the sen-sors or rotor may be damaged, resulting in improper performance of the traction controlsystem.• Be careful not to damage the sensors or rotor.1. Traction control system switch 2. Traction control system mode display